- HOME >
- PRODUCTS >
- Whole machine >
On the steam side of plate condenser, two plates are laser welded together which largely improves the pressure capacity. It also presents reliable performance under pressure. The cooling water side adopts the removable structure, which is easy for disassembling and cleaning.
-
Questions
-
Characteristics
-
Have you had the problems below with your heat exchangers?
1. Being not able to meet the specified working conditions.
2. Leakage under the normal working condition.
3. Less service life than normal.
4. Not able to assemble after maintenance.
If so, you maybe got the wrong type of HE or the HE has quality defects itself. With more than 10 years of manufacturing experience and professional computer program software, REAPTER can accurately calculate the optimal solution according to your requirements. Pressure test will be carried out before the product leaves the factory. With our test means complete, experimental equipment advanced, the product quality problems such as leakage can be avoided. In addition, we will provide remote guidance services for your installation to ensure the normal operation of the product. So choose us, choose REAPTER, perfect solutions will be waiting for you！
-
● Lower cost
Due to the high heat transfer efficiency, this means less heat exchange area and higher cost efficiency than conventional shell and tube type, especially when stainless steel or titanium is required. The compact design also saves space, thus reducing transportation and installation costs.
● Less fouling
Due to the high strength turbulence created by the specially designed corrugated sheets, there is less fouling on the cooling water side than the shell and tube condenser.
● Easy to clean
The cooling water side is easy to clean, whether in the way of mechanical or chemical.
● Easy to expand
Just add an extra "plate group" in the existing frame.
● Complete counterflow
A greater degree of subcooling of non-condensable gases can be achieved compared to shell and tube equipment. Therefore, the load of the vacuum pump will be reduced.