- HOME >
- PRODUCTS >
- Spare parts >
-
Questions
-
Details
-
Gasket with poor qualities got the following defects:
1. Lack of rubber content
2. Recycled material content rather than all fresh material
3. Wrong rigidity
4. Wrong thickness
5. Edge fins, lack of material, being not smooth on the surface
All these quality defects would make destructive influence to the whole machine. Gaskets in REAPTER are all produced independently by ourselves, which can make us strictly control the quality of products to make it with stable performance. Therefore, REAPTER would always be a better choice for you to avoid all of the problems than others. So choose us, choose REAPTER, perfect plate will be waiting for you！
-
Common gasket material: EPDM, NBR, FEPM, Silicone rubber,Viton, Chloroprene
Gasket material
Typical medium
Operating temperature
EPDM
Hot water, Water steam, Acid, alkali
-25°C to +180°C
NBR
Water, Sea water, Mineral oil, Saline water
-15°C to +135°C
F26 or Viton
Acid, Alkali, Fluid
-55°C to +230°C
FEPM
Concentrated acid, Alkali, High-temperature oil, Steam
0°C to +160°C
Common gasket types: Clip on, Stud, Snap in, Glue
Food-grade material and other materials suitable for special working conditions, like elevated or low temperature conditions, are also available. FDA approved gaskets of NBR, EPDM are available.
Common plate material: SS304, SS316L, Titanium, Nickel, Hastelloy, 254SMO
Common plate thickness: 0.5mm, 0.6mm, 0.7mm
Common gasket material: EPDM, NBR, Viton, Chloroprene
Other materials suitable for special working conditions are available as required.